Characteristics

It is one new subtitute of the traditional plaster bandage

Character of new medical bandage (orthopedic casting tape )

Be used in orthopedic molding and fixing

1. Easy operating to reduce the workload of doctors. Our polymer cast and splints are used under the room temperature. And the whole operation can be completed in a short time(several minutes). The polymer material can be curing(solidifying) or ossification in several minutes. And doctors can make them into any shape according to their demands.

2 Molding fast

It begin to be curing (solidifying) after opening the package and being watersoaked, It can bear weight in 20 mins later. The fast molding reduce patients' affliction or suffering. The plaster bandage need more hours for the complete solidifying.

3 High Strength and light weight

      The hardness of the Polymer bandage and splint is 20 times than plaster, And the      weight is only 20% of the traditional plaster material. The doctors may save a lot of bandage material, time and energy.

4 Excellent air permeability

      The unique knitted net stucture make the bandage many holes on the surface to keep good air ventilation and prevent the skin from getting damp, hot & pruritus . This is very important. Many patients may suffer from the skin disease and allergic reaction when then use the plaster bandage.

5 Excellent X-ray radiolucency

        Excellent X-ray radiolucence makes it convenient to take X-ray photos and to    examine the bone healing condition without removing the bandage. If the patients use the plaster bandage, doctors need to remove it when patients need the X-ray examination. And the process of removing must cause great troubles to doctors and much suffering to patients.

6 Water-proof

         The mositure absorbed percent is 85% less than plaster bandage. There are many holes on the surface . The surface tension of the water make the water away from the skin the injured parts. Even on the situation of the patient touching the water, it still can keep the injured part dry.

7 Environment friendly

         Material are environmental friendly ,which can not produce polluted gas after being burn down.

8 Simple operation

        The operation can be done under the room temperature. By using the room temperature water and doctor can complete the operation in short time (in several minutes)

9 These excellent advantages make our polymer bandage and splints the best essential first aid products.

1. Molding fast 2. High Strength and light weight 3.Excellent air permeability 4.Excellent X-ray radiolucency 5.Water-proof .

Specification and Size

2in     KD002        5.0 cm×360cm     10Rolls/Box

3in     KD003        7.5 cm×360cm     10Rolls/Box

4in     KD004        10.0cm×360cm    10Rolls/Box

5in     KD005        12.5cm×360cm    10Rolls/Box

6in     KD006        15.0cm×360cm    10Rolls/Box

Operation

1. Put on the padded covering in the affected body part, and twine with the cotton paper.2. Wear surgical gloves.3. Before opening the package, choose the roll of proper size.4. Immerse the roll in room temperature water for 2-3 seconds and squeeze it 2-3 times.5. Wrap spirally, overlapping the previous layer by one-half or two-thirds the width of the roll. Just 3-4 layers provide a strong non-weight-bearing cast and 5-6 layers are typically adequate for weight-bearing cast.6. KangdaCast is sufficiently cured to pervert further molding in 3-5 minutes after immersion in the water. Allow about 10 minutes for sufficient cure and let patients do not move during this time.7. KangdaCast may be windowed, trimmed or removed with traditional cast saw equipment.

Precaution Please apply the surgical rubber gloves when you operate the product.When the resin is stuck to operator, please wipe it out with cotton swab with acetone.

Recommended Amount of Usage

Size Use2in Childrens hands, fingers, and toes3in Childrens wrists, ankles, and arms and legs4in Childrens legs and ankles, adults hands and wrists5in Adults arms and legs6in Adults arms and legs

Storage

Be careful not to break the package.

Store KANGDA Cast at room temperature.

Damaged products by careless handing cannot be replaced.Please handle and store them carefully.

The shelf life of KANGDA Cast is 3 years from the day of production.